433.92 MHz Roller Shutter Remote Control Unit & 2 Handsets - Built-in Wi-Fi

433.92 MHz control unit with Wi-Fi, Bluetooth and two handsets

This high-quality 433.92 MHz remote-control system is suitable for roller-shutter doors fitted with a 230V tubular motor.

The kit includes the control unit and two remote-control handsets. Each handset has independent open, close and stop buttons, together with a sliding cover to help prevent the buttons from being pressed accidentally.

Three control methods

The built-in Wi-Fi and Bluetooth modules give you three ways to operate your door:

• Remote control: Using either of the two supplied 433.92 MHz handsets.
• Wi-Fi: Using the Tuya Smart app when the control unit is within range of your Wi-Fi signal.
• Bluetooth: From within approximately 15 metres without requiring a Wi-Fi connection.

Wi-Fi set-up instructions are included in the supplied manual and can also be accessed by scanning the barcode inside the control-box cover.

Control and safety connections

The receiver has connections for a low-voltage manual switch, an external key switch, a photocell and other compatible external sensors. It also provides a DC 12V output and open, stop and close dry-contact connections.

When a compatible photoelectric switch is fitted, the receiver supports the following resistance modes:

• Resistance stop mode when the photoelectric switch signal is connected to the S port.
• Rebound-to-the-top or half-circle rebound mode when connected to the IR port.

The required operating mode can be selected using the remote control.

The receiver can monitor the motor’s running current. When the motor stops, including when the door is stopped in an intermediate position, the receiver automatically switches off the photoelectric input to help prevent incorrect operation.

Additional features

• Capacity for up to 20 compatible remote-control handsets.
• Deadman operation, activated by following the programming sequence in the supplied instructions.
• Inching function.
• Motor-direction and push-button direction adjustment.
• Plug-in terminals.
• Industry-standard CPU.
• UV-resistant ABS plastic housing.
• Terminals for a compatible photocell.
• Connections for external key switches.

Extra handsets and a compatible photocell are available from the related-products section.

Technical specifications

• Input voltage: AC 100–240V, 50/60Hz
• Receiving frequency: 433.92 MHz and 2.4 GHz
• Receiving sensitivity: ≤107dB
• Output power: ≤800W
• Operating temperature: −40°C to +70°C
• App: Tuya Smart
• Approximate dimensions: 129 × 76 × 40mm

The unit is supplied with full instructions. If you require a version supplied with a pre-wired plug, please see our other products.