All Products

Roller Shutter Industrial Key Switches - PAIR - KEYED ALIKEComes with 3 keys per box, all 6 keys will work with both boxesSurface MountedHeavy Duty, anti-vandal casing with a sprig loaded safety featureCentre (Off) & Up / Down arrows6 x keys supplied75mm x 75mm x 45mmComes with instructions and ..

Slotted garage door gear fixing plate to provide a fixing for the door lift arms at the bottom of the door panel.Sold as a pairPlates should be used with retractable door gear when fitting the mechanism to metal and GRP (fibreglass) garage doors.Sizes of the plates are; 115mm x 710mm..

PAIR of End Locks made by AlutechAre a PUSH-FITTo fit 37mm high slat (lath) roller shutter garage doors  Made from Nylon Fitted to most standard shutters Please see our related products area below for the larger 55mm and 77mm (3") end locks..

PAIR of End Locks made by AlutechAre a PUSH-FITTo fit 41mm high slat (lath) roller shutter garage doors (widest part 45mm, bit that pushes into the slat is 35mm) Made from Nylon Fitted to most standard shutters Please see our related products area below for the larger 55mm and 77..

PAIR of End Locks made by AlutechAre a PUSH-FITTo fit 55mm high slat (lath) roller shutter garage doors  Made from Nylon Fitted to most standard shutters Please see our related products area below for the larger 77mm (3") end locks..

PAIR of End Locks made by AlutechAre a PUSH-FITTo fit 77mm high slat (lath) roller shutter garage doors  Made from Nylon Fitted to most standard shutters Please see our related products area below for the smaller 55mm end locks..

PAIR of reversible End LocksAre held in place with 2 rivetsTo fit 2" high slat (lath) roller shutter garage doors (Overall length of end lock is 63mm)Hole centres are 13mmFlat part with the holes in is 25mm x 18mm Made from Nylon Fitted to many commercial shutters Please see our ..

PAIR of End Locks complete with 4 rivetsEach end lock is secured with 2 rivetsTo fit 77mm high curved slat (lath) roller shutter garage doors  Made from Nylon Fitted to most standard roller shutter industrial doors Please see our related products area below for the pressed s..

PAIR of End Locks complete with 4 rivetsEach end lock is secured with 2 rivetsTo fit 77mm high curved slat (lath) roller shutter garage doors  Made from Pressed Steel Fitted to most standard roller shutter industrial doors Please see our related products area below for the n..

1 x GENUINE PDT Seceuroglide handset to work with the grey PDT boxes, also knows as Rollertec etc Radio frequency: 433MHz    Please Note: There are several versions of this handset.  They all look the same, however they are not interchangeable.  Please use our guid..

Replacement PDT Light Bulb PDT Systems (Rollertec)Please see our website for other roller door parts and the related products area below for the handsets, magnets and up and down button ribbon tape for the control unit..

Replacement PDT Rollertec Magnet for PDT Systems (Rollertec) bottom slat transmitters (safety edge).Will fit other roller shutter doors like SWS Seceuroglide and Cardale etcPlease see our website for other roller door parts and the related products area below for the handsets and up and down button ..