New 2-Hole Birtley type T-Handle lock - will fit other garage doors such as Golmet, Gliksten and others. 10mm bolt stumps at 50mm centres. 75mm Spindle which can be cut to suit. Supplied with 2 keys...
New 4-Hole T-Handle lock to suit Birtley canopy garage doors finished in Silver. Flat Backing Plate (approx 75mm x 65mm) with 4 front fixing screw holes. 40mm Centres across, 45mm centres up/down. Approx 80mm Spindle which can be cut to suit. Supplied with 2 keys and fi..
PAIR of nylonSpring Shaft Bushes - For the overhead spring Suitable for many canopy Garage Doors such as Henderson (pre 1992) and Classic doors Fits in the brackets that the spring shaft travels through - replacing these can prolong the life of the spring Outside Diameter 19.05mm / 28..
Canopy overhead Spring assembly used on single garage doors manufactured before 1992. The spring assembly is supplied pre-tensioned and comes complete with a pair of Cones & Cables with looped endsThe spring assembly will also fit some Birtley, King and old Wessex garage doors.If your door does ..
Pair of New Cones & Cables for Birtley B3 Canopy Doors Cones & Cables come complete with a pair of Roll Pins, please note the colour of these cones may differ from the originals, both are marked L and R for fitting on the correct side 4mm Pin Punch is necessary to k..
Internal Lock Handle (made in the UK) suitable for Birtley Garage Doors Has button in centre to unlock from the inside even when locked from the outside (Over-ride handle) Will fit most Canopy and some retractable garage doors with lock bars Will fit most makes of Garage Door; He..
Internal Lock Cam for use on all spindle locks Fitted to many Garage Doors, ones with locking bars and lock cablesThe holes for the lock cables are at 76mm centresReplaces the standard plastic cam, used by many brands of Garage Door Fits any standard square-shaft lock Comes ..
Set of 3 of nylon Spring Shaft Bushes - For the overhead spring Suitable for many canopy Garage Doors such as Henderson (pre 1992) and Classic doors Fits in the brackets that the spring shaft travels through - replacing these can prolong the life of the spring Outside Diameter 1..
When replacing garage springs, it is recommended to replace both springs at the same time, to ensure the spring tension and door remain balanced.Birtley Red Spring used on both retractable Birtley and Henderson garage doors. The original Henderson part number is 018759Suits post 1992 E2 retractable ..
Pair of new Birtley type Rollers for Retractable Doors Roller Length 157mm from under head of roller, 170mm overall Wheel Diameter 46mm Shaft Diameter 12mm Comes complete with C-Clips These will fit other doors..
Birtley type T-Handle Garage Door Lock finished in Black Suitable for older type Birtley Timber Doors Spindle 75mm, can be cut to suit (shaft would have to be re-drilled) 17mm spigots which are 50mm apart As per Cardale Part Number AZSP1001 Foam backing pad Comes c..